Jag med flera har länge pratat om att få mer prestanda från start så tankte sparka igång en lite höst tråd så vi har mer att göra när det snöar...
Kikat lite på Tmax samt Gilera...
Tmax Protex (749cc Ducati engine)
99,3 CV och 290 KM/T
http://www.fuorigirimoto.it/tmax_protex.html
GP800 by Moscatelli Moto (ökad till 1030cc)
? CV och ? KM/T
http://www.moscatellimoto.it/GP1000-modificata-cilindrata.htmleller:http://www.moscatellimoto.it/listino-modifica-GP800.htmlAfter 4 years of experience on this vehicle or gp srv are certainly the person who has done more. Of all kinds, original and modified! And we took the track at the highest level of expression this vehicle.
A day after receiving a flood of requests and make recommendations on amending your new scooter, I'm here to provide many new kits modest Motorcycles By Moscatelli.
ALL KIT DO NOT AFFECT THE RELIABILITY 'THE VEHICLE!
Getting started with the kit as required to spend a little more and get good performance.
Kit 1: € 350.00
change the transmission kit includes a complete transmission processing.
Jobs that perform turning against the original clutch pulley work (I do not do it other Polini etc. etc.) Processing of the clutch, change the torque rear spring changed in the new contrast load and twist and finally working crankcase transmission . The change is reversible! Processing time 4 hours
Kit 2: € 750.00
With the addition of the workings of the Kit 1 I mount a drive developed by me on track cvt fr4 m2 very performance and when the best there is. change very inexpensive but makes a difference. Processing time 4 hours
Kit 3: € 1,470.00
With the addition of the workings of the kit 2 we can intervene with a body diameter of 43 mm farffalato an air filter kn an air box a dynamic intake increased in volume entry and the original ECU mapping, dedicated to the vehicle! Processing time 8 hours
Kit 4: the famous DC 1000 (DC 958) € 4,500.00
This kit today is the most reliable performance and that there is on the market
Work to be done with this kit. REPLACEMENT cylinders and pistons with 2 new replacement exhaust system complete! Air filter kn variator cvt fr4 m2 addition of the workings of the Kit 1. Machining body farffalato 43 mm and machining of the intake and the suction sleeve deviation. dedicated mapping ECU. To make this work you must remove the engine from the veicolo.Non includes the coupon (belt oil candles engine oil filter) kit from about 90hp shaft. machining time 10 working days
Kit 5: € 5,000.00
In addition to the working of the kit you can have 4 camshafts riprofilate with various adjustments pistons. machining time 10 working days
set of 6: € 5.500,00 only for those who want to get the most!
In addition the kit Kit 4 and 5 must be carried out a great work (work involves a process of 10 hours each) with change of inclination of the profile valves and valve seat machining time 13 working days
From September, the above change you can also ask at your location with an additional charge of € 100.00 on labor more travel expenses.
The change will be made personally by coach Massimiliano Moscatelli assisted by his mechanic and with the support of his mobile workshop. Processing times a day.
MP's med Daniel Helldén i spetsen och S/V/FI i släptåg, krig mot moped klass 1 och uppåt i Stockholm med förorter, läs mer här --- 
>>--> http://www.scooterforum.se/forum/index.php/topic,1540.0.html
Författare
